Look to Cooling Source as One of the Heatsink Manufacturers That Provide Custom Heatsinks

Cooling Source is one of the heatsink manufacturers that make custom heatsinks. Below is a list of heatsinks the company designs. The heatsinks presented here are only a sample of custom heatsink manufacturers by Cooling Source

Custom aluminum heat sinks are used at nearly every level of electronic cooling because the cost of tooling is low. Cooling Source designs custom aluminum extrusions that are suitable for forced air and natural convection environments.

Die casting heat sinks is a method used by Cooling Source to design custom aluminum heat sinks. The manufacturing process forces liquid aluminum that is under high pressure into steel molds that can be reused. This solution is frequently used when a design calls for low thermal conductivity and high volume.

As one of Livermore, CA's leading heatsink manufacturers, Cooling Source makes custom bonded fin heat sinks. Applications for this type of heat sink include motor drives, variable speed motor controls, and uninterruptible power supplies.

Industries such as transportation, renewable energy, laser and optics, power electronics, medical equipment, and military and space look to heatsink manufacturers for cooling solutions. The custom cold plate options offered by Cooling Source include passive and active cooling solutions. The thermal performance needed dictates the method of manufacturing. For various applications, the methods used include copper brazed, aluminum-vacuumed brazed, machine-path water blocks, epoxy joint, and press-fit copper tubes.

A progressive stamping method is used in the creation of folded fin heat sinks. The fins are bonded to a base with metallurgical bonds such as welding, brazing, or epoxy that are thermally conductive. Folded fin heat sinks combine copper and aluminum to tailor heat sink performance for particular applications.

High conductivity copper is used when heat must be spread over large heat sink bases. When the spread of heat over a large surface is not necessary, low cost and weight aluminum is used by heatsink manufacturers. Common applications requiring folded fin heat sinks are automotive electronics, telecommunications, and power models that require high-density cooling.

Cooling Source makes skived fin heat sinks by literally shaving fins up from an extruded copper or aluminum base. A high fin-to-gap aspect ratio is created by slicing the fins then standing them up individually. Uniform height is maintained by cutting the fin tops. The increased surface area makes a drastic improvement in the thermal performance in environments of forced airflow.

Cooling systems is a one-stop shop for engineered, prototyped, and manufactured thermal solutions. The cutting-edge solutions are backed by knowledgeable engineers and first class customer service. Call them at 952-292-1293.

For further details about heatsink manufacturers and custom heatsinks please visit the website.